Anycubic - Normal UV Resin Black

High-quality, tough and resistant material, ideal for making detailed, accurate prints. The resin is strong enough to create durable and solid models, but not so stiff that it becomes brittle. Its flexibility avoids the deformation of fine detail that often affects accuracy and aesthetics.

This resin is especially optimized for LCD 3D printers, which improves printing efficiency and speeds up curing time. It is not recommended for DLP or SLA printers as it is specifically developed for LCD light sources. The use of this resin ensures stable and durable models while minimizing shrinkage to guarantee excellent accuracy.

Storage suggestions Store the resin away from light at room temperature (15-35℃), as UV light in sunlight can cause it to solidify quickly. Closed storage is important to avoid deterioration due to excessive dust and moisture. Cooler temperatures may increase viscosity.

• Shake the resin thoroughly before use and avoid using in sunny areas.
• Wear gloves to avoid direct skin contact and ensure adequate ventilation.
• In case of accidental contact, rinse with plenty of water and seek medical advice if necessary.
• Clean prints with a high concentration of alcohol (minimum recommended alcohol content 95%) for about 30 seconds.
• Do not pour any leftover resin back into the original container and avoid leaving the resin in the container for long periods of time without use.
• The maximum shelf life of the resin is 18 months.