Anycubic - ABS-Like Resin V2 Grey

Resin V2, similar to Anycubic ABS, has high flexibility, strength and impact resistance, making it suitable for printing structural parts, tools and other high-performance models. The resulting models are suitable for drilling and tapping.

UV Wavelength: 365-405nm
Elongation at Break: 30-40%
Molding Shrinkage: 4.3-5.6%
Viscosity: 180-200cPimPa-s
Heat Deflection Temp: 60-65℃

/ Comments /

Before use:
- Shake the liquid resin before use;
- Clean the resin tank and the casting platform to ensure that the bottom of the resin tank remains translucent.

In use:
- Unscrew the cap and add to the resin tank according to the needs of the device;
- Select the appropriate print parameters and settings for printing.

After use:
- After printing, please use appropriate tools for post-processing, including blades, mouthpieces, tweezers, containers and gloves; clean them with water.

Post-processing steps:
- Remove the printed model from the moulding platform with a blade.
- Dip the model in the cleaning solution, rinse or ultrasonically wash, then remove and dry; We recommend the Anycubic Wash and Cure machines for better results.
- Appropriate after-treatment, such as removing support, polishing, colouring, etc.

Wastewater after-treatment:
- Do not discharge waste water directly into the sewer to avoid contaminating groundwater.
- Heat up the waste water, allow most of the water to evaporate, then discard the remainder after curing with the curing machine and sunlight.